Welche Aufgaben Sie bei uns erwarten
- Führung eines internationalen Teams bestehend aus Statikern, Konstrukteuren und Bauphysikern
- Moderation des standortübergreifenden Austausches zwischen den Technikern
- Umsatz- und gewinnorientierte Bereichsführung
- Aufbau und Weiterentwicklung des Projektcontrollings und der internen Leistungsverrechnung
- Gruppenweite effiziente Ressourceneinsatz- und Auslastungsplanung
- Fachliche Weiterentwicklung des Teams sowie technische Unterstützung
- Mentoring bei fachlichen Herausforderungen
- Sicherstellung der engen Zusammenarbeit mit den Kollegen aus Produktion, Produktinnovation
und Vertrieb sowie externen Dienstleistern - Standortübergreifende Vernetzung von Kompetenzen sowie Knowhowtransfer aus den Bereichen Produktinnovation und Produktion
|
Ihr Aufgabengebiet:
- Planung und Projektierung von elektrotechnischen Maschinen
- Erstellung von Schaltplänen mit ELCAD und/oder Engineering Base
- Auswahl passender Bauteile und Komponenten
- Erstellung von Stücklisten sowie Pflege der Stammdaten
- Enge Zusammenarbeit und Absprache mit der mechanischen Konstruktion
- Betreuung von Montage und Inbetriebnahme sowie Durchführung von Inhouse-Inbetriebnahmen
|
At a glance
- Assist engineers in system board design and verification of high power density and innovative solutions in DCDC power conversion
- Build evaluation kits and perform system function verification and testing
- Prepare design documentation, application notes and getting started guides for various solutions developed
- Acquire knowledge and methodology in system design, trouble shooting and analysis
- Analyze test results and document the outcomes
- Collaborate and contribute to development projects
|
At a glance
- Data Analysis & Dashboard Design – from data to meaningful dashboards
- Maintaining existing dashboards in the area of Analytics, Cleanroom Engineering & Parts Clean
- Data Science & Information Technology
- Interactive data combinations between different data sources (Databases, Excel, etc.)
- Assistance in Cleanroom Engineering Sensor Maintenance (Change Sensors/Configure Sensors/etc.)
- It is also possible to write your bachelor or master thesis during this internship.
|
Auf einen Blick
- Entwicklung von Testprogrammblöcken in Visual Basic basierend auf vorhandenen Testkonzepten
- Zusammenarbeit mit Entwicklerteams
- Integration in Softwareprojekten
|
Vollzeit | befristet | Praktikum
At a glance
- Support component verification engineers in the validation of isolated gate drivers
- Develop setups using automation
- Design PCB boards with Altium
- Document measurement results and debugging setups
- Assist with day-to-day task such as soldering components and maintaining lab equipment
|
|
IHRE HERAUSFORDERUNGEN
- Projektbegleitung und Implementierung intern und
kundenspezifisch - Projektkoordination und Implementierung neuer Arbeitsabläufe oder technischer Lösungen zur Optimierung der Leistungsdurchführung
- Koordinierung und Durchführung von Hookup Projekten
- Analyse und Erarbeitung von Maßnahmen zur Verbesserung der Prozessstabilität beim Kunden
|
At a glance
- Be responsible for test hard- and software development for Si and SiCpower semiconductors
- Manage test specification discussions in project teams
- Generate test programs, integrate test equipment, debug, validate and document test results
- Optimize test methods to improve quality and reduce costs through test platform transfers
- Closely cooperate with different development teams and production locations
- Implement test solutions in our locations spanning all around the world
|
At a glance
- Do compliance checks in the ESD protected lab area (EPA)
- Support the entire calibration process of the lab equipment to ensure that the used equipment is fulfilling the regulations according to the mandatory standard (IATF16949)
- Verify and check that defined lab standards are applied
- Prepare and maintain the software setup on the lab PCs and fix smaller issues
- Ensure that Lab4.0 is possible by enabling samples, boards and equipment to be tracked via scanner, software and database
- Train and enlarge your capability to work with tools like microscope, soldering iron, etc.
- Be responsible for the enrollment of work safety instructions to ensure that everybody is safe in the lab areas and during the daily work
|
At a glance
- Lead a team of technical experts developing SiC-MOSFET, Si-IGBT and diode chip technologies across various Infineon sites
- Set technical direction together with your team within the field of SiC and Si power device technologies for electro-mobility
- Hire and on-board new team members in a fast growing team
- Shape the future growth of your team in accordance to the strategic needs of the electro-mobility market and in close alignment with the global and cross-divisional development teams
- Manage interfaces towards the various stakeholders within ATV and across
- Foster continuous improvement of development methods within your team and within the greater development community
|
At a glance
- Be part of product development projects for our high voltage discrete products: drive the final data sheet and other go-to-market collaterals such as application notes and evaluation boards
- Drive as technical customer interface the technical evaluation and design-in of our products
- Identify and analyze new system concepts, provide technical solutions to our customers and/or derive the impact on our products
- Analyze and assess topologies and application relevant operating conditions via simulation and measurements on prototypes
- Prepare and provide technical documentation and trainings on product and application level
- Be part of a global interdisciplinary expert team consisting of technical marketing, product development, quality, finance, sales and regional marketing.
|
In your career, let’s prove what’s possible.
- Is the lead engineer of a development program (product), making sure that mechanical and electrical hardware and the tool software work together to meet the system specification
- Owns developing the system specification based on the product specification and configuration options
- Is accountable for resolving design tradeoffs/conflicts to ensure the design is integrated, such that the overall product performs as described in the system specification
- Assures that the system meets engineering- and compliance standards, especially in the concept and detailed design phases
- Owns BOM (bill of material) setup and execution of the documentation release plan
- Prepares all required program/product related Engineering deliverables (e.g. FMEA, technical specifications, risk analyses)
- Technical responsible that all interfaces for the entire product are well defined and working
- Participates in the cost allocation model and assures that designs meet the cost targets
- Owns developing the reliability allocation model, the reliability design approach and test plans
|
At a glance
- Assist in testing and extending library of low-level IPs (OTA, current DAC, etc.) and demonstrating the potential of this bottom-up structural approach
- Work in a dynamic environment
- Get the opportunity to sharpen your analog IC Design skills and expand your programming knowledge
- Collaborate with experts in design methodology and analog IC design
|
In your career, let’s prove what’s possible.
- Design, develop, troubleshoot, and debug software programs for enhancements and new products.
- Implement new customer requirements and features in our existing application.
- Maintain and enhance existing code base by investigating and resolving problem areas.
- Demonstrate solutions through clear documentation, flowcharts, and well-structured code.
- Collaborate with cross functional teams to design and develop software programs.
- May visit customer site to provide support and have ability to travel (total is less than 10%).
|
At a glance
- Investigate the feasibility of Rust for the PAS CO2 firmware written in C
|
At a glance
- Get experience with Mixed-Signal High Speed, RF and mmWave and Integrated Circuits.
- Get experience with measurements related to High-Speed PLLs and Data Communication: Jitter, Eye Diagram, BERT.
- Get experience with high-end RF/mmWave measurement equipment.
- Get hand-on experience in Validation and Debugging.
- Design of PCBs for the measurement of products
- Prototype and evaluate new tools and methodologies.
- Familiarize yourself with Validation flow: definition of appropriate measurement setup, automation, data post-processing and analysis.
|
Your future responsibilities
- As a Research Engineer you will be responsible for the automated code-generation workflow for the next generation of highest efficiency and power electronic systems.
- You will work in close collaboration with other experts in the Power Electronic Division which will complement your work from a topology optimization and control development system point of view. You will contribute to research projects (see example below) by defining MCU requirements, digging deep into MCU peripherals, understanding control requirements and maping them the available MCU hardware resources. Finally, you will implement control algorithms using different toolchains in selected MCU platforms and test your implementation in the lab with hardware in the loop test systems and real power electronics hardware. Collaboration with scientists from many different disciplines will enable you to optimize and implement code in order to operate the most efficient converter prototypes achieving highest power densities.
- In the DC-Microgrid project you work on:
- Developing innovative DC/DC converter technologies for varying voltage levels with advanced power semiconductor devices and new materials for magnetics design.
- Enhancing system efficiency, modularity and scalability in industrial DC-grid applications.
- Research on improving methods for energy flow optimization, protection and safety measures, EMI and stability investigations including subsystem interactions for advanced converter systems.
|
At a glance
- Develop/enhance data extraction methods using python API
- Support mixed signal team with automated flow generation
- Conduct test run for the automation tool
- Ensure the automation script is maintainable and follows a clear modular structure
- Code refactoring and documentation
|
At a glance
- Be responsible for high performance analog and mixed signal modules in latest CMOS technologies (e.g. for microcontroller applications)
- Closely cooperate with the design team and the concept/application team
- Applicate for existing characterization techniques, development and automation of new measurement principles
- Visualize and analyze measurement results and debug of new products
|
At a glance
- Be responsible for the development of system-level Signal & Power Integrity simulations to improve the early-stage predictability of Analog Mixed-signal IP within the final application.
|
Your future responsibilities
- Responsibility for lithography systems, mainly track and exposure tools
- Develop new lithography processes
- Collaborate with research teams within SAL to fabricate state of the art research vehicles
- Ensure stable processes and equipment run for the lithography department
- Evaluate new processes and equipment
- Stay current with industry advancements and emerging technologies in lithography and semiconductor manufacturing.
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development, and evaluation in support of the company’s complex semiconductor capital equipment and systems.
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing.
- May conceive and plan projects involving definition and selection of new concepts and approaches in the processing or development of new processes.
- Compiles and evaluates test data to determine appropriate limits and variables for process specifications.
- Supports customer technology managers in the planning, data collection, analysis, and reporting of customer demos to defend existing process applications.
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
|
Your future responsibilities
- Perform literature review (scientific articles, patents, etc.) to gain insights into the latest advancements in wearable technologies for healthcare.
- Perform laboratory and printing tasks according to project needs.
- Support in process development for different functional inks and printers (Inkjet, Screen Printer, Pad Printer, Aerosol Jet, …)
- Support PCB and electronic design and tests compatibility of different printed components
- Perform data analysis and prepare detailed reports.
|
At a glance
- Learn about Infineon’s Smart Power Switches and how to use them in power distribution topologies
- Improve your skills in high-level system modeling with state-of-the-art tools
- Evaluate different topologies and develop an evaluation scheme to scientifically compare them
- Design, build, and evaluate a working prototype
- Document your results by writing and submitting your Master thesis
|
At a glance
- Design and validate use cases and use case-specific algorithms (e.g., Ranging, Access, Sensing) and associated concepts
- Define requirements and develop system models, ensuring integration across higher and lower layers
- Address IC architectural implications (e.g., DSP versus controller)
- Evaluate and implement ML and classical Signal Processing concepts
- Implement algorithms using Matlab, Python, C, or equivalent languages
- Contribute to standardization efforts
|
At a glance
- Support customers during design-in activities for Infineon Medium Voltage GaN products
- Act as third-level customer support, collaborating with Field Application Engineering and Sales teams
- Create technical articles and promotional materials with Product Marketing and Product Definition Engineering teams
- Provide technical direction to in-house R&D, advocating for customer needs
- Collaborate with R&D, Validation, Verification, and Production Test teams
- Review and release technical documentation in coordination with global teams
|
Dein Einsatzbereich:
- Informationstechnologie
- Systems Engineering
- Wirtschaftsingenieurwesen
- Maschinenbau
- Industrial Engineering
- Digital Business Management
- uvm.
|
Your future responsibilities
- Responsibility for dry etch semiconductor fabrication equipment
- Develop new dry etch processes for new materials
- Collaborate with research teams within SAL to fabricate state of the art research vehicles
- Ensure stable processes and equipment run for the dry etch department
- Evaluate new processes and equipment
- Stay current with industry advancements and emerging technologies in lithography and semiconductor manufacturing.
|
At a glance
- Support various projects in the field of strategic communication analysis
- Be responsible for preparing presentation materials, overviews, summaries
|