DEINE ROLLE BEI WILD:
- Du bist verantwortlich für die vollständige und verifizierbare Definition der Systemanforderungen
des zu entwickelnden Produkts (gesetzliche Anforderungen wie z.B. EU-Richtlinien, Anforderungen der Stakeholder) - Du führst Produktrisikoanalysen nach ISO 12100 bzw. ISO 14971 durch und sorgst dafür, dass entwickelte
Produktlösungen normkonform sind - Dein Aufgabenbereich schließt das Abholen der Kundenanforderungen sowie die Kundenberatung
mit ein, um das Inverkehrbringen von Produkten in unseren Märkten zu gewährleisten - Zu den weiteren Aufgaben zählen die Vorbereitung und Teilnahme an Quality Gate Reviews
- Du unterstützt die Projektleitung bei Aufwandsabschätzung hinsichtlich Termin, Qualität und Kosten
|
In your career, let’s prove what’s possible.
- Is the lead engineer of a development program (product), making sure that mechanical and electrical hardware and the tool software work together to meet the system specification
- Owns developing the system specification based on the product specification and configuration options
- Is accountable for resolving design tradeoffs/conflicts to ensure the design is integrated, such that the overall product performs as described in the system specification
- Assures that the system meets engineering- and compliance standards, especially in the concept and detailed design phases
- Owns BOM (bill of material) setup and execution of the documentation release plan
- Prepares all required program/product related Engineering deliverables (e.g. FMEA, technical specifications, risk analyses)
- Technical responsible that all interfaces for the entire product are well defined and working
- Participates in the cost allocation model and assures that designs meet the cost targets
- Owns developing the reliability allocation model, the reliability design approach and test plans
|
Your future responsibilities
- As a Research Engineer you will be responsible for the automated code-generation workflow for the next generation of highest efficiency and power electronic systems.
- You will work in close collaboration with other experts in the Power Electronic Division which will complement your work from a topology optimization and control development system point of view. You will contribute to research projects (see example below) by defining MCU requirements, digging deep into MCU peripherals, understanding control requirements and maping them the available MCU hardware resources. Finally, you will implement control algorithms using different toolchains in selected MCU platforms and test your implementation in the lab with hardware in the loop test systems and real power electronics hardware. Collaboration with scientists from many different disciplines will enable you to optimize and implement code in order to operate the most efficient converter prototypes achieving highest power densities.
- In the DC-Microgrid project you work on:
- Developing innovative DC/DC converter technologies for varying voltage levels with advanced power semiconductor devices and new materials for magnetics design.
- Enhancing system efficiency, modularity and scalability in industrial DC-grid applications.
- Research on improving methods for energy flow optimization, protection and safety measures, EMI and stability investigations including subsystem interactions for advanced converter systems.
|
At a glance
- Support application engineers in the testing and validation of LowVoltage Power MOSFETs
- Develop test setups using automation
- Design PCB boards with Altium
- Document measurement results and debugging setups
- Assist with day-to-day task such as soldering components and maintaining lab equipment
|
Your future responsibilities
- Develop semi-manual and automated assembly processes for the integration of electronic and optical devices on various handling systems.
- Test, debug and document new processes and recipes.
- Perform tasks according to project requirements and develop standard assembly processes, contract research services.
- Provide expertise and solutions to assembly related projects.
- Maintain and repair various assembly machines.
- Assist in the selection and procurement of machine parts.
- Set up and carry out measuring and testing procedures.
- Writing reports and presenting project findings.
|
Your future responsibilities
- Responsibility for lithography systems, mainly track and exposure tools
- Develop new lithography processes
- Collaborate with research teams within SAL to fabricate state of the art research vehicles
- Ensure stable processes and equipment run for the lithography department
- Evaluate new processes and equipment
- Stay current with industry advancements and emerging technologies in lithography and semiconductor manufacturing.
|
Your future responsibilities
- Evaluation of new projects in terms of feasibility and resources
- Introduction of new technologies, flows and products
- Fabrication project management
- Build quality procedures and control tables
- Interface between internal/external partners to the clean room team
- Interaction and communication with the process team, PMs, business development, QM, etc.
|
Your future responsibilities
- Resonator design and modelling of new microstructures. 2D and 3D Multiphysics simulations of resonators (COMSOL or equivalent software)
- Experience in design of resonator-based filters (ladder filters, CRF)
- Design of SAW/BAW filters prototypes
- Analytical modelling of BAW resonators (BVD model, Transfer Matrix, Mason equivalent circuit)
- Coupling-Of-Modes (COM) analysis of SAW resonators
- Good understanding of microfabrication constrains for the development of next generation of acoustic wave resonators for RF MEMS Filters application was well as SAW sensors
- Characterization of resonators and filters
- Extraction of resonators parameters and comparison to models.
- Writing of the invention disclosures leading to patents of new solutions to solve the current technical challenges in next generation of RF MEMS Filters and SAW sensors
|
Your future responsibilities
- Responsibility for dry etch semiconductor fabrication equipment
- Develop new dry etch processes for new materials
- Collaborate with research teams within SAL to fabricate state of the art research vehicles
- Ensure stable processes and equipment run for the dry etch department
- Evaluate new processes and equipment
- Stay current with industry advancements and emerging technologies in lithography and semiconductor manufacturing.
|
Your future responsibilities
- As a Senior Research Engineer you will be responsible for the mechanical modelling of power electronic components, modules and devices as well as the analysis of mechanical and thermal aspects for high power density power electronic systems.
- You will work in close collaboration with other experts in the Power Electronic Division which will complement your work from an electrical system perspective. You will model loss densities in the power electronic components, optimize and design thermal interfacing as well as cooling structures with new substrate materials and work on 3D cooling integration to enable the most compact inverter and converter designs (see project example below). Your simulation work will range from steady-state thermal simulations up to very complex CFD analysis and cooling system optimization having all mechanical CAD design options for the prototype always in your hands. Collaborating with scientists from many different fields will enable you to optimize, design and build the most compact prototypes achieving highest power densities.
|
In your career, let’s prove what’s possible.
- Design, develop, troubleshoot, and debug software programs for enhancements and new products.
- Implement new customer requirements and features in our existing application.
- Maintain and enhance existing code base by investigating and resolving problem areas.
- Demonstrate, clearly communicate, and present solutions through clear documentation, flowcharts, and well-structured code.
- Collaborate with cross functional teams to design and develop software programs.
- Provide technical guidance and mentoring for more junior engineers.
- May visit customer site to provide support and have ability to travel (total is less than 10%).
|
Your future responsibilities
- Perform literature review (scientific articles, patents, etc.) to gain insights into the latest advancements in wearable technologies for healthcare.
- Perform laboratory and printing tasks according to project needs.
- Support in process development for different functional inks and printers (Inkjet, Screen Printer, Pad Printer, Aerosol Jet, …)
- Support PCB and electronic design and tests compatibility of different printed components
- Perform data analysis and prepare detailed reports.
|
In your career, let’s prove what’s possible.
- Work with a cross-functional team of 12 software and controls developers and designers to deliver new features for our industrial machine control software.
- Write efficient, reliable code in C, C++, and structured text for our industrial computer devices as well as interfaces, ensuring functionality and stability.
- Create, optimize, and integrate drivers for peripherals and interfaces like sensors, actuators, and communication modules.
- Analyze and optimize code for memory constraints, performance, and power consumption in embedded environments.
- Ensure maintainability of our first-class codebase through regular peer reviews, testing, and documentation.
- Conduct unit and functional testing, debugging, and troubleshooting of our controls software applications to ensure functionality and stability.
- Collaborate with hardware engineers to integrate software with hardware components and systems.
- Stay updated with industry trends, best practices, and emerging technologies in C++ programming for hardware equipment controls.
|
Your future responsibilities
- Support for managing parts of the power electronics laboratory infrastructure:
- Electronics CAD library management (symbols, footprint and 3D model database).
- Maintenance of laboratory equipment and responsible for managing electronic stock parts.
- Laboratory logistics support, managing and installing new equipment.
- Support scientists and students in research projects focusing on power electronic systems for various applications with:
- Preparation and execution of component and material orders.
- Contact with suppliers and distributors for electronic components.
- Being central contact person for students and scientists for processing orders.
- Assistance for administrative tasks e.g. documentation of research projects, laboratory setups and measurement series; documentation support of meetings…
- Depending on your knowledge, experience and interests, part of the following activities can be additionally expected:
- Electrical and mechanical engineering tasks (SMD soldering, manual soldering, preparing cables and connectors)
- Assembly of electronic circuits and laboratory setups.
- Possibility of contributing to publications in worldwide leading conferences and journals.
- Attending workshops and/or tutorials.
|
In your career, let’s prove what’s possible.
- Design, build and prepare test fixtures\equipment and executes the test followed by data evaluation
- Test set-up and execution for
- Components/Devices
- Systems/Tools
- Execution of tests
- Start-up of test stand
- Handling of related components
- Operating various measurement systems
- Structured diagnostic and problem-solving methods must be used during start-up and LAB testing
- Apply statistical methods for specification of reliability tests and data evaluation
- Create test documentation based on our standards and meaningful presentation of results
- Active cooperation with other colleagues on test stand or tool in our test floors or in our clean room laboratory and handling of acids
- Forward change requests / improvement suggestions to the developer in charge
|
Your future responsibilities
- Technology development for MEMS-based devices in various fields such as optics, acoustic, inertial sensors from concept to prototype.
- Development and implementation of DOE to improve device performance.
- Microfabrication and prototyping in cleanroom facility by using 200 mm wafer level technology.
- Advanced testing of developed MEMS devices (electrical, mechanical, acoustic, …).
- Scientific communication / reporting of research results.
|
Your future responsibilities
- Lead the design, fabrication, and technological advancement of metaoptics, wafer-level optics, and photonic MEMS, from initial concept to prototype development.
- Perform metaoptics and wafer-level optics fabrication using cleanroom facilities.
- Design, execute, and analyze DOE to enhance device performance.
- Execute small-scale fabrication and prototyping for metaoptics, wafer-level optics and photonic MEMS devices, including lithography, nanoimprint lithography, thin film deposition, and etching, utilizing 200 mm wafer-level technology.
- Perform testing of developed metaoptics and wafer-level optics.
- Conduct quality control and document data for statistical process control.
- Communicate and report research findings to both scientific and non-scientific audiences.
- Publish research results in scientific conferences and journals.
|
At a glance
- Measure Infineon components in motor drives, battery protection and DCDC Power Conversion Applications, DCDC Buck Converters, Brick Converters for Telecom, SMPS for Servers/Telecom and Adapters
- Perform tests of leading-edge devices on specially designed boards to support the development and optimization of new technologies
- Carry out competitor benchmarking, organize and analyze data and generate test reports
- Act as technical support for product definition engineering team to validate products value proposition in customer systems during development projects
- Contribute to peer reviews of internal development documents
- Create new application test setups (e.g. design of application test board) including test automation
- Assist Product Application Engineering in writing Application notes, layout- & board design
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development, and evaluation in support of the company’s complex semiconductor capital equipment and systems.
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing.
- May conceive and plan projects involving definition and selection of new concepts and approaches in the processing or development of new processes.
- Compiles and evaluates test data to determine appropriate limits and variables for process specifications.
- Supports customer technology managers in the planning, data collection, analysis, and reporting of customer demos to defend existing process applications.
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
|
At a glance
- Be responsible for the development of system-level Signal & Power Integrity simulations to improve the early-stage predictability of Analog Mixed-signal IP within the final application.
|
In your career, let’s prove what’s possible.
- Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
- Perform analytical problem-solving, troubleshooting, conduct diagnostics, and isolate issues to the component level, and take corrective actions to minimize downtime, system interruptions, and equipment malfunctions.
- Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
- Assist in complex field modifications and updates, maintaining records and reports to coordinate activities between Lam and the customer.
- Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
- Troubleshoot and create customer response action plans to support customer needs.
- Transparently discuss opportunities and challenges with customer to increase trust.
- Provide technical instruction and mentoring for more junior engineers.
|
At a glance
- Be responsible for high performance analog and mixed signal modules in latest CMOS technologies (e.g. for microcontroller applications)
- Closely cooperate with the design team and the concept/application team
- Applicate for existing characterization techniques, development and automation of new measurement principles
- Visualize and analyze measurement results and debug of new products
|
In your career, let’s prove what’s possible.
- BS/MS in Computer Science, Engineering, Information Systems, or the equivalent in experience and evidence of exceptional ability
- 5+ years of experience managing/implementing security measures to harden Windows devices
- Expert-level knowledge and experience in endpoint security, focusing on the following areas:
- Management of Windows 10 / Modern Device Management
- GPO definition, deployment, and management
- Device policies and profiles for Windows 10 devices in MEM/Intune (M365)
- Security Tools (like MDE, Windows Firewall, Beyond Trust, Netskope, etc.)
- Technically sound knowledge and understanding of the following technologies/concepts
- MEM (incl. Co-Management, Auto Pilot, Patch Management)
- MECM current branch (incl. Co-Management)
- Microsoft AD and AAD
- Experience with Endpoint Analytics and OT environments’ security controls
- Hands-on exposure to and experience in remediation activities as part of Vulnerability Management in large enterprises
- Expert-level experience with Windows system hardening activities
- Strong understanding of the Microsoft cloud eco-system (M365, Windows365, VirtualDesktop) and related interfaces
- Excellent written and oral communication skills (English)
|
Vollzeit | befristet | Praktikum
At a glance
- Analog blocks in Infineon microcontrollers
- Analog to Digital (ADC) and Digital to Analog (DAC) converters
- High speed interfaces
- High Precision Oscillators and PLLs
- Power Management Systems (PMS)
- Battery Management Systems (BMS)
- DCDC Converter for low voltage applications and Linear Voltage Regulators (LDOs)
- RF blocks for radar systems
- Bias & Control circuits for 5G antennas
|
In your career, let’s prove what’s possible.
- Responsible for providing quality on-site repair and maintenance service of complex electro-mechanical systems. Analytical troubleshooting of technical problems to component level. Performs complete installation/relocation start-up services
- Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. Determine corrective actions as required.
- Installations and/or relocations of equipment at customers’ sites.
- Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials.
- Assist in complex field modifications and updates as released in Engineering Change Notifications.
- Maintain records and reports as required to properly coordinate activities with supervisors and customers.
- Assist in the planning, management, and execution of projects of a limited scope and duration
|
|
At a glance
- Design and Verify Digital Circuits: From block-level to top-level, you will oversee the entire process of RTL design, ensuring robust logic synthesis and running static timing analysis
- Execute DFT-Related Activities: Lead efforts in scan insertion and ATPG, ensuring our designs are ready for the most rigorous testing environments
- Analyze and Handle challenging design characteristics: Guarantee seamless integration across different clock and power domains, maintaining high design integrity and enabling lowest power consumption
- Collaborate with System Architects and Verification Teams: Define specifications and architectures while working closely with verification teams to develop comprehensive test cases and assertions
- Manage and Guide Teams: You will have the opportunity to manage work packages and mentor a growing team of digital designers, driving innovation and excellence
|
At a glance
- Be responsible for test hard- and software development for Si and SiCpower semiconductors
- Manage test specification discussions in project teams
- Generate test programs, integrate test equipment, debug, validate and document test results
- Optimize test methods to improve quality and reduce costs through test platform transfers
- Closely cooperate with different development teams and production locations
- Implement test solutions in our locations spanning all around the world
|
At a glance
- Support customers during design-in activities for Infineon Medium Voltage GaN products
- Act as third-level customer support, collaborating with Field Application Engineering and Sales teams
- Create technical articles and promotional materials with Product Marketing and Product Definition Engineering teams
- Provide technical direction to in-house R&D, advocating for customer needs
- Collaborate with R&D, Validation, Verification, and Production Test teams
- Review and release technical documentation in coordination with global teams
|
At a glance
- Assist in testing and extending library of low-level IPs (OTA, current DAC, etc.) and demonstrating the potential of this bottom-up structural approach
- Work in a dynamic environment
- Get the opportunity to sharpen your analog IC Design skills and expand your programming knowledge
- Collaborate with experts in design methodology and analog IC design
|